SDSHobby
TWO BLADES 32 NYLON PROPELLER WITH APERTURE=3.18MM, DIAMETER=32MM, PITCH=1.4 FOR RC ELECTRIC BOAT AND NITRO BOAT
Specifications:, Material:, nylon, Aperture:, 3.18mm, Diameter:, 32mm, Pitch:, 1.4,
L1=4mm L2=3mmSDSHobby
TWO BLADES 30 NYLON PROPELLER WITH APERTURE=3.18MM, DIAMETER=30MM, PITCH=1.4 FOR RC ELECTRIC BOAT AND NITRO BOAT
Specifications:, Material:, nylon, Aperture:, 3.18mm, Diameter:, 30mm, Pitch:, 1.4,
L1=3mm L2=3mmSDSHobby
TWO BLADES 35 NYLON PROPELLER WITH APERTURE=3.18MM, DIAMETER=35MM, PITCH=1.4 FOR RC ELECTRIC BOAT AND NITRO BOAT
Specifications:, Material:, nylon, Aperture:, 3.18mm, Diameter:, 35mm, Pitch:, 1.4,
L1=4mm L2=3mmSDSHobby
TOWERPRO MG995 11KG/55.2G ANALOG SERVO HIGH SPEED W/METAL GEARS, 5T FUTABA FOR ROBOT AND RC CARS
| Stall Torque | 11kg/cm at 6.0V |
| No Load Running Speed | 0.17sec/60° at 4.8V, 0.13sec/60°at 6.0V |
| Size (L*W*H) | 40.6mm*19.8mm*37.8mm |
| Weight | 55.2g |
| Gear/ Case Type | metal/ plastic |
| Output shaft gear qty | 25T FUTABA |
| Storage Temperature | -20 |
| Operating Voltage | 4.8-6V |
| Servo Cable Length | 300mm |
| Standard Servo Arms | two |
| Installation Screws | one bag |
| Digital Servo | 1pcs |
Specifications:, Bearing Qty.: 2, Interface Type:, compatible with JR & Futaba interface, Dead band width:≤, Application Fields:, Robot and Remote Control Cars, Included Parts:, Kindly Remark:, The following information and pictures will help you to distinguish the Tower pro,
℃ -60 ℃ 4us , 50-90 Class Nitro Airplanes and ...SDSHobby
V-LEOPARD LBP4274-2.5Y KV2000 4 POLES INRUNNER BRUSHLESS MOTOR FOR RC CAR
| KV (RPM/V) | 2000 |
| Weight (g) | 374 |
| Max Power (W) | 2600 |
| Max Current(A) | 120 |
| Resistance (ohm) | 0.0062 |
| No-load Current(7.4V) | 1.7A |
| Li-Po Battery | 3-6S |
Specification:, , Motor Diameter (mm): 42, Motor Length (mm): 74, Extended Shaft Length (mm): 20, Extended Shaft Diameter (mm): 5, Banana Plug Diameter(mm): 4, Installation Hole Depth(mm): 7, Max Voltage(V): 25, Features:, , Recommended Equipments (need to buy separately):,
The whole efficiency can reach up to over 90%, and ...SDSHobby
V TYPE BOAT HOLDER FOR L900MM-12000MM RC MODEL BOAT
Specifications:, Note:, The colors will be sent randomly.,
L=52CM W=23CM H=28CMSDSHobby
WM MX2 HEPP RC MODEL AEROBATICS ELECTRIC AIRPLANE ARF TYPE B
| Wingspan | 955mm |
| Length | 945mm |
| Wing Area | 15.2dm |
| Weight | 550g (without battery) |
| Motor | 2834;2215; 2217;950-1100KV Brushless outrunner |
| ESC | 25-30A |
| Battery | 3S 11.1V 1100-1300MAH Li-Po |
| Prop | 10*4.7/11*4.7 |
| Servo | 1.5-2kg/cm, 0.1-0.18sec, 9-12g(4pcs) |
Specifications:, Requirements for Ready to Fly Set (need to buy separately):, Features:, The product is mainly made of EPP material, light-weight and resistant. Due to this special material, serious damage would not be caused by slight faulty operation.,
The revolutionary design adds to the structural intensity and the ...SDSHobby
WATER PICKUP MOUNT LENGTH=18MM DIA. =4 FOR RC MODEL BOAT
Specifications:, L1=50mm, Remark:, The above sizes are just for reference, 0-2mm error range is permitted.,
L2=31.5mm D1=4mm D2=4mmSDSHobby
EPOXY PATRON SAINT RC GASOLINE BOAT/ RACING BOAT WITH JAPAN ZENOAH 29CC GAS ENGINE
| Hull Length | 133mm |
| Hull Width | 38mm |
| Hull Height | 21mm |
| Hull Speed | 70-75km/h |
| Hull Material | Epoxy |
| Gross Weight | 14KG |
| Engine | Japan Zenoah 29CC Gas Engine |
| Propeller | 6717 3 blades copper prop |
| Shaft System | D6.35 Shaft Jointer, D6.35mm Flexible Shaft, D6.35mm Drive Shaft without Teeth, D6.35mm Drive Dog |
| Radio Control System | 2.4G 2 channels or 3 channels (Our Item No. |
| Servo | 6kg-cm Throttle Servo, 15kg-cm Steering Servo with metal gears |
Specifications:, Recommended Equipments (need to buy separately):,
NOT Including Clutch